The SCHUNK TENDO-ES is short hydraulic expansion toolholder that allows the tool to be clamped directly in the mounting taper. This way, the tool shank is supported via the spindle. The result is the high holding forces for transferable high torques and additional space in the machining area.

The toolholder is 26.0 mm, has a run-out accuracy of less than 0.003 mm, and tools can be changed in seconds with an Allen key. It is suitable for powerful rough machining, for HPC/HSC, for drilling, reaming, tapping, thread milling, and thread forming. The user profits from brilliant surfaces, workpieces with dimensional accuracy, and long tool life. Complete flexibility is ensured due to the use of intermediate sleeves.

The TENDO-ES is available for the SK 40 and CAT 40 interfaces. The clamping diameter is 20 mm, or ¾ in., and standard TENDO sleeves can be used to clamp smaller tool shank diameters with a balancing grade of G 2.5 at 25,000 rpm.

www.schunk.com